Shooting football in the rain without losing the moment
Rain changes a football match long before the first drop reaches the camera. Players adjust their footing, the ball behaves unpredictably, supporters pull hoods over team colours, and the light can move from bright grey to deep, contrasty shadow within minutes. Those changes create photographs with atmosphere, but they also expose every weak point in a kit.
At Golden Gaels Photos, I have photographed Queen’s University football, athletics and other Canadian university sports in conditions that demanded equal attention to the game and the equipment. The same habits work for wet matches in Australia, whether you are covering a winter fixture in Melbourne, a sudden Sydney shower or a humid Brisbane evening. Good preparation keeps the camera working and leaves you free to concentrate on timing.
| Match conditions | Main equipment risk | Useful response |
|---|---|---|
| Light drizzle | Moisture on the front element | Lens hood, cloth and frequent checks |
| Heavy rain | Water entering controls or mounts | Rain cover, towel and reduced lens changes |
| Wind-driven rain | Spray reaching the camera from the side | Sheltered position and sealed cover |
| Dark, wet conditions | Motion blur and noisy files | Faster shutter speed and tested high ISO |
| Wet ground and mud | Slips, dirt and damaged bags | Waterproof footwear and raised equipment storage |
Prepare before leaving home
A weather forecast is only the beginning. Check the radar, wind direction and expected temperature before packing, then decide whether the match is likely to involve mist, steady rain or a downpour. Melbourne’s winter weather can change rapidly around an exposed oval, while a Sydney storm may arrive with little warning. I pack for the worst realistic condition rather than the first hour of the forecast.
Use a camera body and lens with reliable weather resistance, but treat those labels as protection from moisture rather than permission to work underwater. A rain cover, several microfibre cloths, a small absorbent towel and spare lens-cleaning tissues belong in the bag. Keep batteries fully charged, carry at least one spare and store memory cards in a sealed pouch.
A plastic shower cap or purpose-made cover can provide a useful emergency layer, though it should not block access to the viewfinder or controls. In Australia, a compact poncho from an outdoor shop can protect both photographer and camera bag. Avoid relying on a thin supermarket bag around a hot camera for long periods, as trapped condensation can become its own problem.
Build a rain-ready camera setup
Choose one primary camera and one versatile lens before the match begins. A 70–200mm zoom is particularly useful from a sideline or photographers’ area because it covers tackles, celebrations and wider player groups without requiring frequent lens changes. A second body with a shorter zoom can reduce the need to expose the sensor when the rain becomes heavy.
Every lens change is a chance for water and grit to enter the camera. If changing lenses is unavoidable, move under a stand, awning or large umbrella, turn your back to the wind and keep the camera opening pointed down. Prepare the replacement lens first, with both caps ready to remove and replace quickly.
A monopod can help support a long lens while keeping the kit mobile, but it has to be managed carefully on wet concrete or muddy grass. Rubber feet improve grip, and a strap should never be allowed to drag through puddles. Keep the camera bag elevated on a dry bench, seat or waterproof groundsheet rather than placing it directly on the sideline.
Keep lenses and controls usable
Raindrops on the front element can turn a sharp frame into a soft blur, especially when stadium lights or bright sky sit behind the players. Fit the lens hood, which gives some protection from falling rain and reduces stray light. Wipe gently with a clean microfibre cloth, moving moisture away rather than grinding grit across the glass.
Do not use a sleeve or shirt cuff as a lens cloth. Fabric may carry dust, sunscreen or mud, and repeated rubbing can leave fine marks or oily residue. I keep one cloth for the lens and another for drying the camera body. Several inexpensive cloths are more practical than trying to preserve a single one throughout a wet match.
Rain covers can make buttons, zoom rings and rear screens awkward to reach. Before the game, practise operating the camera while the cover is fitted. Set autofocus mode, drive speed, image quality and exposure controls in advance. Physical controls are generally easier to use through wet-weather protection than touchscreens, especially with cold or wet fingers.
Protect yourself and your position
The safest camera position is often one with some cover, even if it is not the closest position to the goal line. A grandstand edge, team bench shelter or media tent can keep direct rain off the equipment while still offering clear sightlines. Ask permission before entering restricted areas, and keep walkways, officials and team staff unobstructed.
Wet grass creates a practical hazard that has little to do with photography technique. Use footwear with proper tread, avoid backing up without looking and keep straps short enough that they cannot catch on barriers. Canadian university football grounds may have marked media zones and firm sidelines; Australian venues can vary from professional stadiums to open community ovals with muddy edges and limited shelter.
Protecting the photographer also protects the photographs. A soaked jacket, fogged glasses or cold hands make it harder to track a receiver or anticipate a tackle. Wear a waterproof outer layer, use a cap with a brim and keep a dry pair of gloves in the bag. A small towel can cover a camera while you move between positions.
Expose for changing light
Wet conditions often fool the camera’s meter. A pale sky, reflective turf and bright jerseys can push the exposure in different directions from one play to the next. I usually begin with manual exposure or a carefully monitored shutter-priority setting, then check the histogram and highlight warning rather than trusting the rear-screen brightness.
Football action needs a fast shutter speed. For running players and contact, around 1/1000 second is a useful starting point, with faster settings for a sharp ball or flying spray. Raise the ISO when necessary instead of allowing the shutter to fall into a range that produces motion blur. Modern cameras handle moderate high ISO well, and a clean, sharp frame is usually more valuable than a technically perfect low-ISO file that lacks definition.
Continuous autofocus with subject tracking can work well when players move across a plain background, but rain streaks may confuse the system. Use a smaller group of focus points when the background contains spectators, advertising boards or goalposts. Keep shooting bursts controlled so the buffer does not fill during a long passage of play.
Find pictures beyond the action
Rain gives a match a visual language of its own. Look for spray lifting from boots, water running off helmets, hands gripping a wet ball and players huddling beneath a sideline cover. These details add context to the familiar peak-action frame and can make a gallery feel like a complete record of the day.
Reflections on synthetic turf, puddles beside painted lines and blurred supporters under umbrellas can create strong backgrounds. Australian football culture offers plenty of visual colour, from club scarves and wet-weather jackets to volunteers moving equipment around a community ground. For Canadian university football, the Queen’s colours, marching bands and crowded stands provide similar layers around the play.
Do not let the rain become a reason to photograph only dramatic collisions. Watch for the quiet moments: a kicker checking the ball, a coach wiping water from a play sheet, teammates helping someone up or a band member protecting an instrument. Those photographs communicate the conditions without needing an exaggerated effect.
Dry, inspect and back up
When the match ends, resist the temptation to seal a wet camera immediately in an airtight bag and leave it there. Wipe the exterior, remove visible moisture and place the equipment in a cool, dry room. If the camera has moved from a cold outdoor ground into a warm building, allow it to reach room temperature gradually. This helps reduce condensation inside the body and lens.
Do not put wet gear directly beside a heater or use a hairdryer. Rapid heat can damage seals, adhesives and delicate components. A ventilated camera cupboard or dry cabinet is useful for photographers working regularly in humid parts of Australia, while silica gel packets can help inside a larger storage case. Replace or recharge them according to the manufacturer’s instructions.
Check the lens mount, battery compartment, card door and cable ports before the next assignment. Download files to two separate locations as soon as practical, then inspect a sample at full size for water spots, missed focus and motion blur. Keep the original files intact; rain photographs often benefit from careful cropping and tonal adjustment later.
Shooting football in the rain is a balance between access and restraint. The goal is not to eliminate every drop, but to stop moisture from controlling the assignment. With a prepared kit, sensible exposure settings and attention to the story around the play, wet-weather images can show more character than a routine dry match.
Photographers building a personal archive can browse Golden Gaels Photos for examples of Queen’s University football, athletics, bands and U SPORTS events. Images are generally available for personal, non-commercial use with attribution, while copyright remains with Jeff Chan. Use the archive as a reference for timing, atmosphere and visual storytelling, then take your rain-ready camera to the next match.